Best tensionar bearing dealers in india| sv hi-tech bearings india pvt - Delhi

indiasbest #bestdealers #Qualityproducts #trustedseller
specialoffers #savewater #planttreessavelives #DrugFreeIndia #svhitechbearings #Tensionar bearing
9381019307/9445394232
Tensioner bearing
Idler bearing at tight side) There are various styles according to engine types. Functions To provide belt with tension To transfer driving force from crankshaft To prevent belt slippage To prevent noise caused by off-line belt To minimize space of belt layout.
happens if the tensioner fails?
Image result for tensioner bearing
When a timing belt tensioner fails, it loses tension. As a result, the timing belt becomes loose and the valve timing can be thrown off. This leads to engine performance issues. So if any suspicion arises that the timing belt tensioner has failed, it's important to check the tensioner and replace it if necessary.
tensioner used for?
A tensioner maintains the correct amount of tension on the belt at all times throughout its duty cycle. It also helps protect other components such as the alternator and water pump from undue stress and premature failure. In addition, a tensioner is a relatively inexpensive part to replace.
tensioner bearing same as idler bearing?
Image result for tensioner bearing
Of these, in the timing belt mechanism, the type with a slotted hole in the inner ring or a bracket for tension adjustment is sometimes called the "tensioner bearing," and the type without an adjustment mechanism is sometimes called the "idler bearing."
Types of tensioners
Fixed tensioners , once mounted, cannot be adjusted further. They must be remounted to alter tension. A variation is a specially compounded rubber wheel that can provide some take up while in a fixed position. Adjustable tensioners allow pulleys and sprockets to pivot or slide

A tensioner is a device that applies a force to create or maintain tension. The force may be applied parallel to, as in the case of a hydraulic bolt tensioner, or perpendicular to, as in the case of a spring-loaded bicycle chain tensioner, the tension it creates. The force may be generated by a fixed displacement, as in the case of an eccentric bicycle bottom bracket, which must be adjusted as parts wear, or by stretching or compressing a spring, as in the case of a spring-loaded bicycle chain tensioner; by changing the volume of a gas, as in the case of a marine riser tensioner; by hydraulic pressure, as in the case of a hydraulic bolt tensioner; or by gravity acting on a suspended mass, as in the case of a chair lift cable tensioner. In the power sector, the tensioner is a machine for maintaining constant tension of the conductors during work of hanging the transmission network..